M90 MAG Tube-Sheet Welding Head
| Previous | 9 / 9 | Next |
- First no-twist wire feeding for MAG tube to tube-sheet welding
- Auto High efficiency
Product Description
This is a specially designed automatic MAG tube to tube-sheet welding system for engineering machinery sleeve. It is fixed by positioner, 3D manipulator or intelligent spring balancer, wide range of localization. It is the first no-twist design for MAG tube to tube-sheet system, smooth in wire feeding, convenient and fast.
Application: Boiler, engineering machinery, and so on.
Features
- Suitable for engineering machinery sleeve welding, boiler tube to tube-sheet and boiler pull bar MAG welding
- Localizer for wide range positioning
- No-wire-twist design and special wire feeding design to meet complex single-or multi-layer welding requirements
- Auto swing during welding
- Pneumatic locking on manipulator for up/down and left/right moving
- 15~20KG wire feeding plate, wire diameter: Φ1.0 & Φ1.2
Specification
| Material | Carbon steel |
| Tube OD(mm) | Φ38 ~ Φ260 |
| Rotation speed(rpm) | 0.23~4.6 |
|
Torch Angle
|
0°~60° |
| Protective Gas | Ar |
| Cooling | Water |
| Cooling Flow(ml/min) | ≥600 |
| Duty cycle | 320A 60% |
| OSC Width(mm) | 40 |
| Manual Adjusting Height (up & down) (mm) | 40 |
| Wire Diameter(mm) | Φ1.0, Φ1.2(standard) |
| Weight(kg) | 15 (no cable) |
| Dimension(mm) | 700x250x240 |